Instruction manual NSF VSI / VSI W / VSI T / VSI
TW Operation
38065447002 en-US 57 / 101
Choose depositing type.
On touch screen tap tile .
The selection window for the depositing type
opens.
Fig.48: Main page stacking
Choose depositing type. (stacks, shin-
gles lengthwise, shingles crosswise, cir-
cular pattern, shaving)
The selection will be shown via a check.
Confirm selection.
The default values for the selected Deposit-
ing type will be loaded.
Fig.49: Choose depositing type
Changing parameters.
Tap tile of parameter to be changed.
The window to change the parameter
opens. The value of the parameter may be
changed.
Fig.50: Main page shingling crosswise
Enter value directly or change value step
by step using the Up/Down keys and
confirm.
Fig.51: Change parameters
To Next Page
Loading...
Need help?
General
