Bosch Solution 16i - Page 136

11-12
Bosch Security Systems 09/11 BLCC500I
Solution 16i  Installation Manual  System Programming
Sh=
3) Enter the Schedule number (1-8) you want to
program, then press [OK].
d= 01
4) Use numeric keys to enter the option number
required, then press [OK] to save and exit or press
[MENU] to exit without saving.
Disabled
Setting this option will disable the schedule.
Area On/Off
Setting this option will cause the system to turn ON at
the START time and turn OFF at the STOP time. Setting
the Time to 12:00 am will disable the function and you
will see --:-- am on the display.
The INDEX is the AREA to turn on and/or o, setting the
index to zero will arm and disarm all areas.
Area Part On/Off
Setting this option will cause the system to turn ON
in Part Mode 1 at the START time and turn OFF at the
STOP time. Setting the Time to 12:00 am will disable the
function and you will see --:-- am on the display.
The INDEX is the AREA to turn on and o in Part Mode,
setting the index to zero will arm and disarm all areas.
Operate Output
Setting this option will cause the system to operate the
output at the start time and turn the output o at the
stop time. Setting the Time to 12:00 am will disable the
function and you will see --:-- am on the display.
The INDEX is the Ouput Number to turn on and o,
setting the index to zero will disable the output.
Timer Group
Setting this option will assign the start and stop times to
a Timer Group to restrict user access to doors and areas.
The INDEX denes the Timer Group to link to. See MENU
1-4-4 — Timer Group for information on assigning users
to timer groups.
System > Schedules > l754
Index

MENU 7-5-4
0
This menu allows you to program which Area, Output or
Timer Group the Schedule will operate. The index type is
determined by the schedule function which was selected
in MENU 7-5-3.
1) Enter your Installer PIN + [MENU].
2) Enter [7] + [5] + [4] + [OK].
The keypad will display the sh = prompt.
Sh=
3) Enter the Schedule number (1-8) you want to
program, then press [OK].
d= 01
4) Use numeric keys to enter the index number
required, then press [OK] to save and exit or press
[MENU] to exit without saving.