Bosch Solution 16i - Page 49

5-7
Bosch Security Systems 09/11 BLCC500I
Solution 16i  Installation Manual  Access Programming
-Bit-
1 4 5 6
4) Repeat Step 3 until all options are programmed as
required, then press [OK] to save and exit or press
[MENU] to exit without saving.
Has Master PIN Code Privileges
Setting this option assigns the user as Master User.
Master Users have have access to additional commands
for administering the system. Non-Master Users have
limited access to menu options. See the Menu Referrence
Table in Section 5 for a list of available Master User
commands.
Expire PIN Code
Setting this option will cause the User PIN to expire
after the time period set in Menu 1-5-3 — PIN Expire
Time. The time will reset each time the user PIN operates
the system. Valid times are from 1 to 255 Days. Setting
the time to 0 will prevent the code from expiring. To
reactivate an expired PIN simply enter a new PIN for the
User.
Is Arm Only Code
Setting this option restricts the Users PIN code to only
turn an area on. The PIN code has no access to turn an
area o or reset an alarm.
Can Bypass Zones
Setting this option allows the User to manually bypass
and un-bypass zones.
Can Auto Bypass Zones
Setting this option allows the User to to turn the area
on, even though one or more zones are still faulted or
open. Upon arming, the system will prompt the user to
automatically bypass each faulted zone. To prevent users
from being able to force arm an area you will need to
disable this option.
Send Open/Close Reports
Setting this option will cause the system to send opening
and closing reports when the user arms and disarms an
area.
U ND ER STAND IN G T IM ER G RO UP S
Timer Groups are used to restrict users from operating
doors outside given times, days or holidays. To do this
you need to create a timer group, then assign one or more
schedules to the timer group to specify the access period,
day of the week and holidays. To now restrict the user,
they must belong also to the same timer group. This now
restricts the user from accessing the system outside the
nominated times and days within the schedules linked to
the timer group.
User
Can only belong to 1 timer group.
Schedules
Multiple schedules can be linked to the same timer group.
Timer Groups
There are 8 dierent timer groups available.
Timer Group Example
1) To set up a timer group you need to select an
unused timer group number from 1 to 8, in this
example we will assume timer group number to be
5.
2) Select an unused schedule and program the times
and day of the week then assign the schedule to
timer group 5
3) Then under user properties assign the users who
you wish to restrict to timer group 5. Remember
that you are only able to assign a user to one access
group.
A master code holder is able to change the schedules so
they can change the access times for a given user. If a user
tries to operate the system outside their assigned timer
group periods then access will be denied.
Access > User Properties > tMR grp
Timer Group

-

MENU 1-4-4
00 = No Timer Group
01 = Timer Group 1 05 = Timer Group 5
02 = Timer Group 2 06 = Timer Group 6
03 = Timer Group 3 07 = Timer Group 7
04 = Timer Group 4 08 = Timer Group 8
This menu allows the master user or installer assign
each user to a timer group. Timer groups can be used to
restrict User access to be within specic times dened by
schedules. Each user can only be assigned to one timer
group. Setting this option to 0 will give the user 24 hour
access to the system.
1) Enter your Installer PIN or Master PIN + [MENU].
2) Enter [1] + [4] + [4] + [OK].
The keypad will display the Ur = prompt.