Brady TLS2200 User Manual

Step 9. Edit Text
Changing Font Sizes
At any time during the text entry or editing process, you can change the font size for the label
line displayed on the text editor screen. This can be done on a line-by-line basis only. To
change the font size for a given line, simply press <Shift> + <
▲> or <Shift> + <▼>
respectively to increase or decrease the font size.
Cursor and Editing Keys
Use the following keys to edit your legend:
For key combinations (for example, Shift
+ ◄) you must press the first key first. Then,
while still holding it down, press the second key.
Keys Description
• Activates a screen selection.
Enter
• When composing a legend, inserts a non-visible end-of-line
character and moves the cursor down to the next line.
• Clears system messages from display.
►
Moves the cursor one character to the right. If at the rightmost
position on the display, the display is scrolled one character to the
left and the cursor remains at the rightmost position.
◄
Moves the cursor one character to the left. If at the leftmost
position on the display, the display is scrolled one character to the
right and the cursor remains at the leftmost position.
▲
Displays the previous line of text (if any).
▼
Displays the next line of text (if any).
Skips to the beginning of the next word.
Shift + ►
Skips to the beginning of the previous word.
Shift + ◄
• While in text editor, deletes the character at the cursor position.
Delete
• Backs out one level in the Setup Menu tree.
• Terminates the printing of markers.
Backspaces as it deletes characters. If cursor is at the first
character position on a line, the carriage return is deleted and any
text on the line is appended to the text on the previous line.
Shift + Delete
Clears all characters on the current legend line.
Legend Clear
Clears all characters on the legend.
Shift + Legend
Clear
10 TLS2200
™
Thermal Transfer Printer User Manual

Brady TLS2200 Specifications

General

Brand	Brady
Model	TLS2200
Category	Printer
Language	English