Page 104 of 113
Go Back:
Jump to a specified segment in the same profile
End:
Make this segment the end of the profile
The below four kinds of combination are allowable for connecting segments.
Ramp-Ramp
Ramp-Dwell
Dwell-Ramp
Dwell-Dwell
4.3.1.2.2 Segments:
The user can add or Insert or Remove the segments of the Profile in this section. Press
Add and then press Enter Soft key to access the Segment Configuration window.
Type:
Select the Segment type. The Available segment types are as below.
Ramp
Time To Target
Dwell
Go Back
End
To Next Page
Loading...