EasyManua.ls Logo

Brainchild PR Series - Specification; Input1

Default Icon
113 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 14 of 113
1.7 Specification
1.7.1
Input1
Resolution: 18 bits
Sampling Rate: 5 times / second
Maximum Rating: -2 VDC minimum, 12 VDC maximum (1 minute for mA input)
Temperature Effect: 1.5uV/°C for all inputs except mA input, ±3.0uV/°C for mA input
Sensor Lead Resistance Effect:
T/C: 0.2uV/ohm;
3-wire RTD: 2.6°C/ohm of resistance difference of two leads;
2-wire RTD: 2.6° C/ohm of resistance sum of two leads
Burn-out Current: 200nA
Common Mode Rejection Ratio (CMRR): 120dB
Normal Mode Rejection Ratio (NMRR): 55dB
Sensor Break Detection:
Sensor Open for TC, RTD and mV inputs
Sensor short for RTD input
Below 1 mA for 4-20 mA input,
Below 0.25V for 1 - 5 V input,
Unavailable for other inputs.
Sensor Break Responding Time:
Within 4 seconds for TC, RTD and mV inputs,
0.1 second for 4-20 mA and 1 - 5 V inputs.
Characteristics:
Type Range Accuracy @ 25°C Input Impedance
J -120°C to 1000°C ( -184°F to 1832°F )
±2°C 2.2 MΩ
K -200C to 1370 C ( -328°F to 2498°F ) ±2°C 2.2 MΩ
T -250°C to 400°C ( -418°F to 752°F ) ±2°C 2.2 MΩ
E -100°C to 900°C( -148°F to 1652°F ) ±2°C 2.2 MΩ
B 0°C to 1800°C( 32°F to 3272°F ) ±2°C( 200°C to 1800° C )
2.2 MΩ

Table of Contents

Other manuals for Brainchild PR Series