21
12.3 Operating mode
12.4 Environmental conditions
13. Disposal
Note
The user institution is obliged to process the product before its disposal, see
Validated reprocessing procedure.
► Detailed information concerning the disposal of the product is avail-
able through your national B. Braun/Aesculap agency, see Technical
Service.
14. Distributor in the US/Contact in Can-
ada for product information and com-
plaints
Aesculap Inc.
3773 Corporate Parkway
Center Valley, PA, 18034,
USA
Operating mode Operation with non-periodic load and
speed changes (type S9 pursuant to
IEC EN 60034-1)
Right/left rotation:
■ 60 second application, 60 second
pause
■ 20 repetitions
■ 30 min cooling time
■ Max. Temperature 48 °C
Milling (clockwise/counterclockwise):
■ 30 second application, 30 second
pause
■ 8 repetitions
■ 30 min cooling time
■ Max. Temperature 48 °C
Drilling (oscillation):
■ 60 second application, 60 second
pause
■ 4 repetitions
■ 30 min cooling time
■ Max. Temperature 48 °C
Saw mode with GB660R:
■ 30 second application, 60 second
pause
■ 3 repetitions
■ 30 min cooling time
■ Max. Temperature 48 °C
Operation Storage and transport
Temperature 10 °C to 27 °C -10 °C to 50 °C
Relative
humidity
30 % to 75 % 10 % to 90 %
Atmospheric
pressure
700 hPa to 1 060 hPa 500 hPa to 1 060 hPa
Adhere to national regulations when disposing of or recy-
cling the product, its components and its packaging!
The recycling pass can be downloaded from the Extranet
as a PDF document under the respective article number.
(The recycling pass includes disassembling instructions for
the product, as well as information for proper disposal of
components harmful to the environment.)
Products carrying this symbol are subject to separate col-
lection of electrical and electronic devices. Within the
European Union, disposal is taken care of by the manufac-
turer as a free-of-charge service.
To Next Page
Loading...
