Only relevant when a VB262 QAM demodulator is present in the
chassis.
Symbol Rate
check:
Enable or disable alarming of symbol rate inaccuracy with
reference to QAM threshold settings.
Only relevant when a VB262 QAM demodulator is present in the
chassis.
Packet error
count check:
Enable or disable alarming of one or more erroneous packets after
FEC.
Only relevant when a VB270 DVB-S/S2 demodulator is present in
the chassis.
Input
overflow
check:
If enabled an alarm will be raised provided input overflow is
detected.
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
www.bridgetech.tv
154
To Next Page
Loading...