BridgeTech VB20 - COFDM - Tuning Setup (VB252)

6.13.2 COFDM - Tuning setup (VB252)
In this view the operator can define frequencies that will be used by the COFDM
demodulator for tuning. A name is associated with each tuning configuration, and this
name will be used by the probe when referring to the stream. The frequencies and
some associated key parameters are shown in the COFDM tuning list. Each entry in the
list may be edited by clicking the Edit field.
To add a new frequency to the list click the Add new tuning button. A pop-up window
will appear allowing the user to enter tuning parameters.
When one set of tuning parameters has been defined it is possible to click the button
Import from NIT in order to have the other frequencies automatically added to the
list, as defined in the Network Information Table(s) analysed by the probe. Default
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
www.bridgetech.tv
184