EasyManua.ls Logo

BridgeTech VB20 - Page 49

BridgeTech VB20
261 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Traffic
RX data: The total bitrate of received data traffic
Monitoring
:
The total bitrate of multicasts and unicasts monitored (analysed) by
the probe
Data interface
IPv4
status:
The IPv4 status as defined in the Setup – Ethernet view
IPv4
address:
The probe IPv4 Ethernet data/video interface IP address as defined by
the user in the Setup – Ethernet view
Ipv4
netmask:
The probe IPv4 Ethernet data/video interface netmask as defined by
the user in the Setup – Ethernet view
Management interface
IPv6
status:
The IPv6 status as defined in the Setup – Ethernet view
IPv6
address:
The probe IPv6 Ethernet data/video interface IP address as defined by
the user in the Setup – Ethernet view
Ipv6
netmask:
The probe IPv6 Ethernet data/video interface netmask as defined by
the user in the Setup – Ethernet view
ETH info
Joined: The number of joined streams (multicasts and unicasts)
Unicasts: The number of unicasts currently being joined/monitored by the probe
Multicasts
:
The number of multicasts currently being joined/monitored by the
probe
IGMP ver: The IGMP version currently used by the probe. IGMPv2 is used unless
the operator has selected source specific multicasts (Setup - Params
view), in which case IGMPv3 is used.
VLAN tag: The VLAN tag currently used by the probe. If no VLAN tag has been
specified by the operator (Setup - Params view), the VLAN tag value
will read disabled.
ETH alarms per type
No signal: The number of currently active Ethernet 'No signal' alarms
CC skips: The number of currently active Ethernet 'CC skips' alarms
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
www.bridgetech.tv
50

Table of Contents