EasyManua.ls Logo

BridgeTech VB20 - Page 57

BridgeTech VB20
261 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
skip.
IAT >=
err-
thresh:
The Inter-packet Arrival Time exceeds
the error threshold
Default: Disabled, severity
Error
IAT >=
warn-
thresh:
The Inter-packet Arrival Time exceeds
the warning threshold
Default: Disabled, severity
Warning
MLR >=
err-
thresh:
The Media Loss Rate exceeds the
error-threshold
Default: Enabled, severity
Error
MLR >=
warn-
thresh:
The Media Loss Rate exceeds the
warning-threshold
Default: Disabled, severity
Warning
TTL
changed:
The Time-To-Live field is changing Default: Enabled, severity
Error
TOS
changed:
The Type-Of-Service field is changing Default: Enabled, severity
Error
Multiple
mcast
sources:
There are multiple multicast sources Default: Enabled, severity
Error
Mcast
source
changed:
The multicast source changed to one
of the valid multicast sources specified
by the operator.
Default: Enabled, severity
Error
Bitrate
overflow:
The stream bitrate exceeds the
maximum bitrate Ethernet threshold
value specified by the operator.
Default: Enabled, severity
Error
Bitrate
underflow
:
The stream bitrate goes below the
minimum bitrate Ethernet threshold
value specified by the operator.
Default: Enabled, severity
Error
FSM alarms
Full service
monitoring:
Enable to view all FSM alarms. Default: Enabled, severity
Major
ETR (ETR 290) alarms
TS Sync: No TS Sync Default: Enabled, severity
Major
Sync byte: Sync byte error Default: Enabled, severity
Major
PAT: Program Association Table error Default: Enabled, severity
Major
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
www.bridgetech.tv
58

Table of Contents