EasyManua.ls Logo

BridgeTech VB20 - Page 77

BridgeTech VB20
261 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Duplicate IP-frames in the network can occur under normal
circumstances and does not necessarily indicate network
problems.
The following sequence will generate an RTP dups of +2:
..., 10, 11, 12, 12, 12, 13, 14, ...
RTP ooo: Accumulated number of times a packet has been found to be out
of order.
Only available for multicasts that carry RTP information.
An out-of-order situation is defined to have occurred when the
current sequence number is lower than the previous one.
The following sequence will generate an RTP ooo of +2 (since
there are two occurrences): ..., 10, 11, 15, 12, 16, 17, 13, 14, 18,
19, ...
RTP lag: The maximum number of packet positions an out-of-order packet
has been moved relative to its correct position. So for example
1,2,3,5,6,7,8,4,9,10 will result in an RTP lag of 4.
The RTP lag is a good measure of how big a packet re-ordering
buffer is needed in the receiving equipment to re-order packets.
Min hole size: Minimum number of consecutive dropped RTP packets. The
sequence 1,2,3,10,11,12,15 gives a min hole size of 2.
Max hole
size:
Maximum number of consecutive dropped RTP packets. The
sequence 1,2,3,10,11,12,15 gives a max hole size of 6.
Min hole sep: Minimum number of RTP packets separating any holes. The
sequence 1,2,3,10,11,12,15 gives a min hole sep of 3.
Num holes: Number of packet loss sequences. The sequence
1,2,3,10,11,12,15 gives a num holes of 2.
FEC mode: The CoP3 FEC mode
FEC drops: Number of RTP packet drops in the main stream that the FEC could
not correct
C-FEC drops: Number of IP packets in the column-FEC streams dropped
R-FEC drops: Number of IP packets in the row-FEC streams dropped
Statistical parameters
MPEG-2 transport stream parameters
i:
Click the information icon to access the Detailed Monitoring
pop-up view.
Name: The stream name specified by the user in the Edit Multicast view
ES(IAT): Number of seconds during selected period with Inter-packet Arrival
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00 -
www.bridgetech.tv
78

Table of Contents