Brother BAS-705 - Page 81

10. TROUBLESHOOTING
― 78 ―
BAS-705
Fixed knife position
Fixed knife installation
position is too close to
needle hole.
Adjust the fixed knife
installation position to
the correct
44
Lower thread breaks at
the final stitch.
Problem Page
Remedy
CheckCause
Tension and height of
thread take-up spring
Thread amount
Thread take-up amount
is too large.
Incorrect height or
tension of thread take-up
spring.
Double cutting during
thread trimming.
Decrease the tension or
raise the height of the
thread take-up spring.
29
Reduce the thread
amount.