Brother MFC-7365DN Service Manual

5-23
Confidential
1.4.15 Received data transfer function (Function code 53) (FAX model only)
<Function>
This function transfers received FAX data to another machine. It is useful when the machine
cannot print received data due to the printing mechanism being defective. And this function
faxes the maintenance information of the machine.
<Operating Procedure>
(1) Press the 5 and 3 buttons in this order in the initial state of the maintenance mode.
The “FAX TRANSFER” appears on the LCD.
• To check the number of received files, press the 1 button. The “1.NO. OF JOBS”
appears on the LCD.Press the OK button, and the number of received files appears,
just as “NO. OF. JOBS: 10.”
• To transfer the activity report only, press the 2 button. The “2.ACTIVITY” appears on
the LCD.
• To transfer received files (together with the activity report), press the 3 button.
The “3.DOCUMENTS” appears on the LCD. Note that if there is no received file, the
“NO DOCUMENTS” appears.
• To transfer the communication list for the latest communication, press the 4 button.
The “4.COM.LIST (NEW)” appears.
• To transfer the communication list for last three errors, press the 5 button.
The “5.COM.LIST (ERR3)” appears on the LCD.
• Press the 6 button to transfer the maintenance information (list of function code 77).
The "6.MNT77 LIST" appears on the LCD.
(2) With the “2.ACTIVITY,” “3.DOCUMENTS,” “4.COM.LIST (NEW),” “5.COM.LIST
(ERR3),” or “6.MNT77 LIST” being displayed, press the OK button. The “ENTER NO &
SET” appears on the LCD.
(3) Enter the telephone number of the receiver machine and press the OK button again.
(4) The machine displays the “ACCEPTED” for approximately two seconds and starts
dialing to transfer data.
Note:
• This function transfers received FAX file to another machine. It is useful when the
machine cannot print received FAX file due to the printing mechanism being defective.
• If there are both color and monochrome data in a FAX file to be transferred, the
monochrome data will be transferred first. If the receiver machine does not support the
color function, the sender machine cannot transfer color data, resulting in an error.
Note:
• Be sure to type the telephone number with the numerical buttons. No one-touch dialing
is allowed in this procedure.
• No station ID will be attached. A cover page and end page as shown on the next page
will be automatically attached, instead.

Brother MFC-7365DN Specifications

Printing Specifications

print technology	Electrophotographic Laser
print speed	Up to 24ppm
print resolution	Up to 1200 x 600 dpi

Copying Specifications

copy speed	Up to 24cpm
copy resolution	600 x 600 dpi
copy reduction/enlargement	25% - 400% in 1% increments

Scanning Specifications

scanner type	Color Flatbed with ADF
document glass size	8.5” x 11” (letter)
scan resolution	Optical: Up to 600 x 2400 dpi

Paper Handling

paper size maximum	Up to 8.5” x 14” (legal size)
paper input capacity maximum	250-sheet capacity paper tray, single-sheet manual feed slot
output capacity maximum	100 sheets (face down), 1 sheet (face up)

Weight and Dimensions

unit dimensions	15.9” W x 15.7” D x 12.4” H
unit weight	25.6 lbs.
carton weight	32.6 lbs.
carton dimensions	20.7” W x 20.1” D x 19.4” H