5-31
Confidential
1.4.20
Printout of maintenance information (Function code 77)
<Function>
This function is to print out log information.
<Operating Procedure>
(1) Press the 7 button twice in the initial stage of the maintenance mode. The
“MAINTENANCE 77” will appear on the LCD.
In the case of the model without the numeric keys; Press the or button. The
“MAINTENANCE 77” appears on the LCD. Then press the OK button.
(2) The machine prints out a list of log information. Upon completion of printing, the machine
returns to the initial state of the maintenance mode. The example of the log information
is shown below.
■ Maintenance information
Fig. 5-13
To Next Page
Loading...
