Brother MFC-7365DN Service Manual

5-26
Confidential
1.4.17 Acquisition of white level data (Function code 55)
<Function>
This function allows you to acquire the white level of the scanner unit and save it to the
EEPROM of the main PCB.
<Operating Procedure>
(1) Press the 5 button twice in the initial state of the maintenance mode.
In the case of the model without the numeric keys; Press the or button. The
“MAINTENANCE 55” appears on the LCD. Then press the OK button.
(2) The “Press START” will appear on the LCD. Press the Start button.
The “SCANNER AREA SET” will appear on the LCD.
(3) After a few seconds, the machine saves the compensation of the white level data/
scanning width in the EEPROM, beeps for one second, and returns to the initial state of
the maintenance mode.
Note:
• After deep sleep mode is released, execute this function code. If the correct white level
data is not yet acquired, update the firmware to the latest version. If updating the
firmware is not possible, open and close the front cover, and then retry acquisition after
the main motor has stopped.

Brother MFC-7365DN Specifications

Printing Specifications

print technology	Electrophotographic Laser
print speed	Up to 24ppm
print resolution	Up to 1200 x 600 dpi

Copying Specifications

copy speed	Up to 24cpm
copy resolution	600 x 600 dpi
copy reduction/enlargement	25% - 400% in 1% increments

Scanning Specifications

scanner type	Color Flatbed with ADF
document glass size	8.5” x 11” (letter)
scan resolution	Optical: Up to 600 x 2400 dpi

Paper Handling

paper size maximum	Up to 8.5” x 14” (legal size)
paper input capacity maximum	250-sheet capacity paper tray, single-sheet manual feed slot
output capacity maximum	100 sheets (face down), 1 sheet (face up)

Weight and Dimensions

unit dimensions	15.9” W x 15.7” D x 12.4” H
unit weight	25.6 lbs.
carton weight	32.6 lbs.
carton dimensions	20.7” W x 20.1” D x 19.4” H