Brother MFC-7365DN Service Manual

5-42
Confidential
2.6 ON/OFF Setting of Deep Sleep Function
In addition to the sleep function with the normal specifications, the deep sleep function is
prepared to reduce the power consumption.
The deep sleep function is used to stop the operation of the following functions whereas they
are available in the normal sleep mode.
• Operation of the wireless LAN
• Operation of all the fans
<Transition conditions>
The machine goes into the deep sleep function when the user does not operate the machine
(from a PC) and no warning such as an error is issued after it goes into the normal sleep
mode and all the fans are stopped. When secure print exists, the machine does not go into
the deep sleep mode.
<How to Exit>
The machine exits from the deep sleep function when it receives an input from the outside,
for instance when it receives print data from a PC, or when any button on the control panel is
operated, or when the front cover is opened or closed.
■ Setting of ON/OFF of the deep sleep function
You can set ON/OFF of the deep sleep function so that the machine will not go into the deep
sleep function even when the aforementioned conditions are satisfied.
<Operating Procedure>
(1) Press the Menu button while the machine is in the ready state.
(2) Press the or button to display “General Setup” on the LCD, and then press the OK
button.
(3) Press the or button to display “General Setup/Ecology” on the LCD, and then
press the OK button.
(4) Press the or button to display “Sleep Time” on the LCD, and then press the OK
button.
(5) Press the Job Cancel button and Start button at the same time while “Sleep Time/ *Min”
is displayed on the LCD. “Deep Sleep/On*” is displayed on the LCD.
(6) Press the or button to switch Deep Sleep On and Off and display the state that
you want to set, and then press the OK button.
(7) The machine goes back to the “Sleep Time/ *Min” on the LCD.
Note:
• When no operation is made for 30 seconds during the switching operation, the machine
goes back to the ready state.
• The initial value of Deep Sleep is set to On.
• In the procedure (5), the present setting (On or Off) of Deep Sleep is displayed on the
LCD.
• “*” is displayed on the right side of the present setting (On or Off) of Deep Sleep.

Brother MFC-7365DN Specifications

Printing Specifications

print technology	Electrophotographic Laser
print speed	Up to 24ppm
print resolution	Up to 1200 x 600 dpi

Copying Specifications

copy speed	Up to 24cpm
copy resolution	600 x 600 dpi
copy reduction/enlargement	25% - 400% in 1% increments

Scanning Specifications

scanner type	Color Flatbed with ADF
document glass size	8.5” x 11” (letter)
scan resolution	Optical: Up to 600 x 2400 dpi

Paper Handling

paper size maximum	Up to 8.5” x 14” (legal size)
paper input capacity maximum	250-sheet capacity paper tray, single-sheet manual feed slot
output capacity maximum	100 sheets (face down), 1 sheet (face up)

Weight and Dimensions

unit dimensions	15.9” W x 15.7” D x 12.4” H
unit weight	25.6 lbs.
carton weight	32.6 lbs.
carton dimensions	20.7” W x 20.1” D x 19.4” H