Brother MFC-7365DN Service Manual

5-39
Confidential
2. OTHER SERVICE FUNCTIONS
2.1 Developer Roller Counter Reset Function
This function is to manually perform the operation same as the one when a toner cartridge is
replaced with a new one. The purpose of this function is to provide a means to resolve an
error when a new toner cannot be recognized by the machine, and the toner life display fails
to be cleared.
(1) Open the front cover.
(2) Press the Clear/Back button and
“Replace Drum? / 1. Yes 2. No” or “Replace Drum? Yes No” appears on the LCD.
(3) Reset the counter in the following procedures by the toner type.
<Models with numeric keys>
Starter toner: Press the *, 1 and 0 button in this order.
Standard toner: Press the *, 1 and 1 button in this order.
High capacity toner: Press the *, 1 and 2 button in this order.
If the toner type is unknown, press the *, 0 and 0 in this order. The input number appears
on the LCD in 2 seconds.
<Models without numeric keys>
Starter toner: Press the Start button, and press the or button to display “10” on the
LCD. Then press the OK button.
Standard toner: Press the Start button, and press the or button to display “11” on
the LCD. Then press the OK button.
High capacity toner: Press the Start button, and press the or button to display “12”
on the LCD. Then press the OK button.
If the toner type is unknown, press the Start button and press the or button to
display “00” on the LCD. Then press the OK button.
“Accepted” is displayed on the LCD.
(4) “Cover is open” appears on the LCD after 2 seconds.
(5) Close the front cover.
Note:
• If there is no operation for 30 seconds or more, the machine automatically returns to
step (1).

Brother MFC-7365DN Specifications

Printing Specifications

print technology	Electrophotographic Laser
print speed	Up to 24ppm
print resolution	Up to 1200 x 600 dpi

Copying Specifications

copy speed	Up to 24cpm
copy resolution	600 x 600 dpi
copy reduction/enlargement	25% - 400% in 1% increments

Scanning Specifications

scanner type	Color Flatbed with ADF
document glass size	8.5” x 11” (letter)
scan resolution	Optical: Up to 600 x 2400 dpi

Paper Handling

paper size maximum	Up to 8.5” x 14” (legal size)
paper input capacity maximum	250-sheet capacity paper tray, single-sheet manual feed slot
output capacity maximum	100 sheets (face down), 1 sheet (face up)

Weight and Dimensions

unit dimensions	15.9” W x 15.7” D x 12.4” H
unit weight	25.6 lbs.
carton weight	32.6 lbs.
carton dimensions	20.7” W x 20.1” D x 19.4” H