4-17
Confidential
2.10 Obtain machine information (instruction to the end user)
Users who had their machine repaired must retrieve the head calibration data from their PCs.
If the Printer Driver Settings in [Advanced] [Other print options] "Automatically Retrieve
Printer's Color Data" of [Retrieve Printer's Color Data] is ON (default), the data is obtained
automatically.
If "Automatically Retrieve Printer's Color Data" is OFF, instruct the user to obtain machine
information by performing the following the steps below.
<Windows
®
>
(1) <Operating systems other than Windows 8>
On the user computer, click [Start] [Settings] [Printers] to display the Printers window.
Right-click the Brother Printer driver icon and click on Properties from the pull-down menu.
After clicking Properties, the Properties dialog will open. Click on [Print Settings].
<Windows 8>
On the user computer, click [Settings] [Control Panel] [Devices and Printers]. From the
printer driver's pull-down menu, Click [Print Settings].
(2) Click [Advanced] [Other print options] [Retrieve Printer's Color Data].
(3) Confirm that the [Use Printer's Color Data] check box is selected.
(4) Click [Retrieve Printer's Color Data].
(5) Wait for the dialog to appear then click [OK].
<Macintosh>
(1) Select the connected machine from the machine list of the user's PC.
(2) Select [Open Print Queue] [Printer Setup] [Utility] [Open Printer Utility].
(3) From the menu bar, select [Control] [Retrieve Printer's Color Data].
(4) Wait for the dialog to appear then click [OK].
*For a detailed explanation on how to acquire printer information, refer to the Brother Solution
Center FAQ.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
