5-42
Confidential
1.3.21 Printout of PRN/JPEG Files in Memory Card (Maintenance Mode 61)
<Function>
This procedure prints PRN files and JPEG files stored in a memory card supported by Photo Capture
Center.
The following four print modes are available.
• Printing the specified file once.
• Printing the specified file repeatedly.
• Printing all PRN/JPEG files once.
• Print all files repeatedly: Printing all PRN/JPEG files in the memory card repeatedly.
File name requirements
The target files are located in the root directory.
PRN file: Maximum of 16 characters consisting of alphanumerics, underline "_" and parentheses
"( )", including the extension ".prn".
JPEG file: Maximum of 16 characters consisting of alphanumerics, underline "_" and parentheses
"( )", including the extension ".jpg".
The maximum number of files is 999.
<Operating Procedure>
(1) Insert a memory card.
(2) Press the [6] and [1] keys in this order in the initial stage of the maintenance mode.
The machine displays "MAINTENACE 61" on the LCD.
(3) To print a PRN file(s), press the [#] key; to print a JPEG file(s), press the [*] key.
The file name appears on the LCD.
(4) To print the specified file once, select the target file with the [ ]/[ ] keys and press the [4]
key. The machine displays "1. A4 2. LETTER" on the LCD.
Press the [1] or [2] key to match the paper size indicated in the file data.
To print the specified file repeatedly, select the target file with the [ ]/[ ] keys and press the
[6] key. The machine displays "1. A4 2. LETTER" on the LCD.
Press the [1] or [2] key to match the paper size indicated in the file data.
To print all files of the selected type once, press the [7] key. The machine displays
"1.A4 2.LETTER" on the LCD.
Press the [1] or [2] key to match the paper size indicated in the file data.
To print all files of the selected type repeatedly, press the [9] key. The machine displays
"1.A4 2.LETTER" on the LCD.
Press the [1] or [2] key to match the paper size indicated in the file data.
Upon completion of printing, the machine returns to the state showing "MAINTENACE 61" on
the LCD. Pressing the [Stop] or [X] key during repeated printing returns the machine to the
state showing "MAINTENACE 61" on the LCD.
Note This function is not available when Error Code A* or B* occurs.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
