2-41
Confidential
■ Error Code 82
Recording paper jam.
The paper width sensor could not detect the leading edge of recording papers.
<User Check>
- Remove the jammed recording paper.
- Check if the recording paper used is according to specifications.
- Check if dark recording paper is not used.
- Clean the platen.
- Check if the paper tray is loaded correctly into the machine.
- Check if the jam clear cover is properly closed.
- Clean the paper pull-in roller.
Disc Jam / Paper Jam
LCD
Step Cause Solution
1 Foreign materials in the recording
paper feeding path
Remove foreign materials.
2 Paper feeding path parts out of
place
Reattach the paper feeding path parts.
3 Paper feed roller stained Clean the paper feed roller.
4 Paper feed motor harness
connection failure
Reconnect the paper feed motor harness.
5 Paper pull-in roller worn out Replace the paper pull-in roller.
6
Paper feed roller defective
Paper feed motor defective
Replace the engine unit.
7 Paper width sensor defective Replace the carriage PCB ASSY.
8 Main PCB defective Replace the main PCB ASSY.