2-12
Confidential
3.2 Error Messages
First Line Status
Error
Code
Reference
B&W 1-sided Print
Only Replace Ink
Ink ejection has reached the specified number of
times when the ink remaining sensor detects that
the ink replacement period is approaching. Only
black printing is possible.
26, 27, 28,
29
2-23
BT Call Sign On
(UK only)
The receiving mode cannot be changed since the
BT Call sign is ON.
Cannot Detect The ink cartridge cannot be detected properly.
20, 21, 22,
23, 24, 25
2-21,
2-22
Cannot Detect Ink
Vo l u m e
The ink volume cannot be detected properly.
Cannot Print Replace
Ink
Ink ejection has reached the specified number of
times when the ink remaining sensor detects that
the ink replacement period is approaching.
26, 27, 28,
29
2-23
Check for a Printable
Disc
The disc size is incorrect or there is no disc loaded
on the disc tray.
93
2-45
Comm.Error A problem occurred in fax communication. 2-82
Connection Fail The receiver fax cannot set Polling. 2-82
Cover is Open.
An open scanner cover was detected. An open ink
cover was detected.
A1, 2F
2-46,
2-25
Data Remaining in
Memory
Data cannot be processed since the memory is
full.
2-84
Disc Jam (Front)
Disc Jam (Rear)
The disc tray is jammed. (Front)
The disc tray is jammed. (Rear)
31, 38, 3C,
82
84, 8A, 8C
2-27,
2-29,
2-30,
2-41,
2-42,
2-43
Disc Tray did not
Feed
The disc tray is not set in the disc guide.
2-53
Disc Tray hits at the
back
The disc tray collided with an obstacle at the back
of the machine.
90
2-44
Disconnected The receiver's fax machine stopped. 2-82
Document Jam
The document scanning sensor detected a
document jam inside the ADF.
A2, A3
2-46,
2-47
DR Mode in Use
The receiving mode cannot be changed from
manual to other modes since the Distinctive Ring
mode is enabled.
Failed to detect the
original
The home position of the disc or photo cannot be
detected during scanning.
High Temperature
The head thermistor detected that the room
temperature is too high.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
