2-54
Confidential
4.2.4 Recording paper feeding at an angle
<User Check>
- Check if the recording paper is loaded correctly in the paper tray.
- Adjust the paper tray guide to match the recording paper size.
- Check if the recording paper's thickness is within specifications.
- Check if too much recording paper is loaded in the paper tray.
- Clean the paper pull-in roller.
4.2.5 Recording paper is wrinkling
<User Check>
- Check if the recording paper is loaded correctly in the paper tray.
- Try reversing the recording paper in each paper tray, or rotating direction of the paper for 180
degrees.
- Adjust the paper guide to match the recording paper size.
- Check if the recording paper's thickness is within specifications.
- Check if the recording paper is not damp.
Step Cause Solution
1 Paper pull-in roller not mounted
in place
Reattach the paper pull-in roller.
2 Bank ASSY out of place Reattach the bank ASSY.
3 Paper feeding path parts out of
place
Set the paper feeding path parts into place.
4 Main PCB defective Replace the main PCB ASSY.
Step Cause Solution
1 Feeding path parts are out of place Reattach the feeding path parts.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
