Brother MFC-J285DW Service Manual

5-28
Confidential
(6) Press the [Mono Start] key.
The machine displays "Please wait" on the LCD.
Note • Never remove the external memory from the machine when updating is in progress.
• If this procedure has been started by the user in maintenance mode, the machine returns to
the standby state after showing "Please wait" on the LCD.
(7) Wait for the machine to return to the initial stage of the maintenance mode and show
"**** Active" on the LCD, remove the external memory and store it in a safe place.
Note If any of the error messages listed below appears, press the [Stop] or [X] key, and the
machine returns to the initial stage of the maintenance mode.
Restoration procedure
(1) Insert the external memory containing the backup data into the slot of the machine in the initial
stage of the maintenance mode. The machine displays "**** Active" on the LCD. ("****"
shows the name of the external memory inserted.)
Note • Do not insert more than one external memory at a time.
• If the serial number in the backup data stored in the external memory does not match that
of the machine, data restoration cannot be performed.
(2) Press the [4] and [6] keys in this order.
The machine displays "Export to Card" on the LCD.
(3) Press the [ ] or [ ] key until the desired item, any of the following, appears on the LCD.
"Import from Card" for restoring only user setting information.
"Import all" for restoring all backup data including machine information.
(4) Press the [Mono Start] key.
The file name "********.msd" appears on the LCD.
The "********" is unique to each model.
(5) Press the [Mono Start] key.
The machine again displays "Import from Card" or "Import all" on the LCD.
(6) Press the [Mono Start] key.
The machine displays "Please wait" on the LCD.
Note Never remove the external memory from the machine when updating is in progress.
(7) Wait for the machine to automatically return to the initial stage of the maintenance mode and
show "**** Active" on the LCD.
Note If any of the error messages shown in "Backup Procedure" appears, press the [Stop] or [X]
key to return the machine to the initial stage of the maintenance mode.
Error Message Causes
Card is used The external memory is being used by another operation.
Insert Card No external memory is inserted.
No file File name is invalid. No "BROTHER" folder exists.
Card Error External memory failure.
Machine ID Error
Mismatch of serial numbers between the machine and the backup
data (which is detected only in data restoration).
Write Error Insufficient free space in external memory.

Brother MFC-J285DW Specifications

General

Print technology	Inkjet
Maximum resolution	6000 x 1200 DPI
Economical printing	Yes
Print speed (ISO/IEC 24734) mono	12 ipm
Print speed (ISO/IEC 24734) color	10 ipm
Print speed (black, normal quality, A4/US Letter)	33 ppm
Print speed (color, normal quality, A4/US Letter)	27 ppm
Copier resize	25 - 400 %
Maximum copy resolution	- DPI
N-in-1 copy function (N=)	2, 4
Scan to	E-mail, File, Image, OCR
Scanner type	Flatbed scanner
Image formats supported	BMP, JPG, PCX, PNG, TIF
Maximum scan resolution	19200 x 19200 DPI
Document formats supported	HTM, PDF
Optical scanning resolution	1200 x 2400 DPI
Faxing	Color faxing
Fax memory	170 pages
Modem speed	14.4 Kbit/s
Fax transmission speed	7 sec/page
Digital sender	-
Maximum duty cycle	2500 pages per month
Number of print cartridges	4
Total input capacity	100 sheets
Total output capacity	50 sheets
Maximum print size	216 x 356 mm
Paper tray media types	Glossy paper, Photo paper, Transparencies
ISO A-series sizes (A0...A9)	A4
Photo paper sizes (imperial)	4x6, 5x7, 5x8 \
Paper tray media weight (imperial)	4 - 6 lbs
Display	LCD
Control type	Touch
Product color	Black
Display diagonal	1.8 \
Market positioning	Home & office
Ethernet LAN	No
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Security algorithms	SSID, WEP, WPA-PSK, WPA2-PSK
Online services supported	Box, Dropbox, Evernote, Facebook, Flickr, Google Drive, Picasa, Sky Drive
Mobile printing technologies	Apple AirPrint, Brother iPrint & Scan, Google Cloud Print
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Sound pressure level (copying)	50 dB
AC input voltage	100 - 120 V
AC input frequency	50 - 60 Hz
Power consumption (average operating)	- W
Sustainability certificates	ENERGY STAR
Package depth	457 mm
Package width	477 mm
Package height	228 mm
Package weight	9380 g
Storage temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	373 mm
Width	409 mm
Height	160 mm