2-133
Confidential
4.13.5 Receive buffer full during receiving into memory
< User Check >
- Print the print data stored in the memory.
- Divide the print data and print it.
4.14 Troubleshooting for Other Problems
4.14.1 Cannot make print
< User Check >
- Turn the power OFF/ON.
- Properly insert the USB cable.
- Properly insert the LAN cable.
- Check if the maximum number of pages that can be printed is exceeded.
- Check if PC-print is not prohibited.
- Check the print restricted ID.
- Check if print data is not damaged.
4.14.2 Problem of USB direct interface
< User Check >
- Replace the
USB flash memory
.
- Check if the extension of the data in the USB flash memory is correct.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Step Cause Remedy
1 Forgot the print restricted ID Clear the old ID and get a new ID by
Function code 01.
2 Connection failure of the
wireless LAN harness ASSY
Reconnect the wireless LAN harness ASSY.
3 Wireless LAN PCB failure Replace the wireless LAN PCB ASSY.
4 Main PCB failure Replace the main PCB ASSY.
Step Cause Remedy
1 Connection failure of the USB
host relay PCB harness
Reconnect the USB host relay PCB harness.
2 USB host PCB failure Replace the USB host PCB ASSY.
3 Main PCB failure Replace the main PCB ASSY.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
