Brother MFC-L8850CDW - If You Replace the Registration Mark Sensor Unit; Continuous Adjustments of Density and Registration Sensor (Function Code 73)

4-7
Confidential
2. IF YOU REPLACE THE REGISTRATION
MARK SENSOR UNIT
■ What to do after replacement
- Continuous Adjustments of Density and Registration Sensor (Function code 73)
2.1 Continuous Adjustments of Density and Registration
Sensor (Function code 73)
Perform continuous adjustments of density and registration sensor in accordance with “1.3.29
Continuous adjustments of density and registration sensor (Function code 73)” in Chapter 5.