Brother MFC-L8850CDW Service Manual

5-10
Confidential
1.3.5 Worker switch (WSW) setting and printout (Function code 10, 11)
[1] Worker switch (WSW) setting (Function code 10)
<Function>
The worker switches shown in the table below can be used to set the function to satisfy
various requirements. The switch setting can be changed using the keys on the control panel.
The worker switches are factory set to conform with the laws and regulations of the country the
machine is shipped to. Do not change these settings unless necessary.
WSW No. Function WSW No. Function
WSW01 Dial pulse setting WSW29 Function setting 7
WSW02 Tone signal setting WSW30 Function setting 8
WSW03 PABX mode setting WSW31 Function setting 9
WSW04 Transfer facility setting WSW32 Function setting 10
WSW05 1st dial tone and busy tone
detection
WSW33 Function setting 11
WSW34 Function setting 12
WSW06 Redial/Pause key setting
and 2nd dial tone detection
WSW35 Function setting 13
WSW36 Function setting 14
WSW07 Dial tone setting 1 WSW37 Function setting 15
WSW08 Dial tone setting 2 WSW38 V.34 transmission settings
WSW09 Protocol definition 1 WSW39 V.34 transmission speed
WSW10 Protocol definition 2 WSW40 V.34 modem settings
WSW11 Busy tone setting WSW41 ON-duration of the scanning light
source
WSW12 Signal detection condition
setting
WSW42 Internet mail settings
WSW13 Modem setting WSW43 Function setting 16
WSW14 AUTO ANS facility setting WSW44 Speeding up scanning-1
WSW15 Redial facility setting WSW45 Speeding up scanning-2
WSW16 Function setting 1 WSW46 Monitor of power ON/OFF state
and parallel port kept at high
WSW17 Function setting 2
WSW18 Function setting 3 WSW47 Switching between high-speed
USB 2.0 and full-speed USB 1.1
WSW19 Transmission speed setting
WSW20 Overseas communications
mode setting
WSW48 USB setup latency
WSW49 End-of-copying beep and print in
black
WSW21 TAD setting 1
WSW22 ECM and call waiting caller
ID
WSW50 SDAA settings
WSW51 Function setting 17
WSW23 Communications setting WSW52 Function setting 18
WSW24 TAD setting 2 WSW53 Function setting 19
WSW25 TAD setting 3 WSW54 Function setting 20
WSW26 Function setting 4 WSW55 Interval of time required for the
developing bias voltage correction
WSW27 Function setting 5
WSW28 Function setting 6 WSW56 Function setting 21

Brother MFC-L8850CDW Specifications

General

Type	all in one
Color	white
Tray Capacity	300
Automatic Document Feeder Capacity	50 sheets
Paper Size	8.5"x14"
Paper Handling	up to 300 sheets
Color Print Speed	32 pages per minute
Mono Print Speed	32 pages per minute
Print Resolution Color	up to 2400 x 600
Maximum Number of Pages Per Month	unknown
Scanner Type	flatbed
Scan Resolution	up to 2400 x 1200
Copier Resolution Mono	up to 600 x 600
Copier Resolution Color	up to 600 x 600
Cartridges	tn331bk, tn331c, tn331m, tn331y
Number Of Cartridges	4
Internal Memory	yes
Memory Card	no
Network	wired, wireless
Connectivity	usb, google cloud print
OS Compatibility	windows, mac os, linux
Mobile Devices Connection	yes

Weight and Dimensions

Height	19.3 inches
Width	20.7 inches
Net Weight	67.4 pounds