Brother MFC-L8850CDW - Page 358

3-194
Confidential
(5) Remove the five Taptite cup S M3x6 SR screws and remove the T2 beam F ASSY from the
Main body .
Fig. 3-285
(6) Remove the Retaining ring E4 from the Feed roller and remove the Gear 24 and Feed
roller bushing.
Fig. 3-286
Taptite cup S M3x6 SR
T2 beam F ASSY
Taptite cup S M3x6 SR
Taptite cup S M3x6 SR
<Front side>
Main body
Retaining ring E4
Gear 24
<Left side>
Feed roller
Feed roller bushing