Brother MFC-L8850CDW Service Manual

5-12
Confidential
<Operating procedure>
(1) Press the 1 and 0 keys in this order in the initial state of the maintenance mode. “WSW00”
is displayed on the LCD.
(2) Enter the number of worker switch to change.
The following is displayed on the LCD.
(3) Move the cursor to the selector you want to change with the or key, and change the
value by pressing the 1 or 0 key.
(4) When you finish changing the value, press the SET key. This operation saves the newly
entered selector values onto the EEPROM and readies the machine for accepting a
worker switch number (WSW00).
(5) When worker switch setting is completed, press the X key to return the machine to the
initial state of the maintenance mode.
Note:
- To cancel this operation and return the machine to the initial state of the maintenance
mode during the above procedure, press the X key.
- If there is a pause of more than one minute after a single-digit number is entered for
double-digit worker switch numbers, the machine will automatically return to the initial
state of the maintenance mode.
Selector 1 Selector 8

Brother MFC-L8850CDW Specifications

General

Type	all in one
Color	white
Tray Capacity	300
Automatic Document Feeder Capacity	50 sheets
Paper Size	8.5"x14"
Paper Handling	up to 300 sheets
Color Print Speed	32 pages per minute
Mono Print Speed	32 pages per minute
Print Resolution Color	up to 2400 x 600
Maximum Number of Pages Per Month	unknown
Scanner Type	flatbed
Scan Resolution	up to 2400 x 1200
Copier Resolution Mono	up to 600 x 600
Copier Resolution Color	up to 600 x 600
Cartridges	tn331bk, tn331c, tn331m, tn331y
Number Of Cartridges	4
Internal Memory	yes
Memory Card	no
Network	wired, wireless
Connectivity	usb, google cloud print
OS Compatibility	windows, mac os, linux
Mobile Devices Connection	yes

Weight and Dimensions

Height	19.3 inches
Width	20.7 inches
Net Weight	67.4 pounds