Brother MFC-L8850CDW - Page 481

7-24
Confidential
(26) Remove the Screw pan (S/P washer) M3.5x6 screw and remove the Modem ground
harness from the High-voltage power supply PCB ASSY.
Fig. 7-41
(27) Disconnect the wiring of the Modem ground harness.
(28) Remove the four Taptite bind B M4x12 screws from the Back cover upper.
(29) Release the two Hooks and remove the Back cover upper from the Main body.
Fig. 7-42
<Right side>
High-voltage power
supply PCB ASSY
Modem ground harness
Screw pan (S/P washer) M3.5x6
Taptite bind B M4x12
Taptite bind B M4x12
Back cover upper
Hook
Hook
Main body
<Front side>