Brother MFC-L8850CDW - Page 483

7-26
Confidential
(34) Release the three Hooks 1. Release the other seven Hooks and remove the Joint cover
base ASSY from the Main body.
Fig. 7-45
(35) Remove the six Taptite bind B M4x12 screws and four Taptite cup S M3x6 SR screws,
and remove the Scanner cover plate from the Main body.
Fig. 7-46
Assembling Note:
When assembling the six screws of the Taptite bind B M4x12, be sure to assemble
them in the order shown in the figure.
Hook 1
Hook
Hook
Hook
Hook
Joint cover base ASSY
Main body
<Front side>
Taptite bind B M4x12
Taptite bind B M4x12
Taptite bind B M4x12
Taptite bind B M4x12
Taptite cup S M3x6 SR
Taptite cup S M3x6 SR
Main body
1
2
3
4
5
6
Taptite cup S
M3x6 SR
<Front side>
Scanner cover plate