Brother MFC-L8850CDW - Page 490

7-33
Confidential
(15) Remove the Screw bind M3x8 screw and remove the Panel FG harness from the Main
shield cover plate ASSY.
(16) Remove the three Screw bind M3x8 screws and remove the Main shield cover plate
ASSY from the Main body.
Fig. 7-59
(17) Remove the two Screw bind M3x8 screws and remove the ADF earth harness and
Document scanner FG harness from the Main PCB plate.
(18) Disconnect the two Connectors (CN39 and CN41) from the Main PCB ASSY and release
the wiring of the Main PCB insulation sheet.
Fig. 7-60
Main body
Main shield cover plate ASSY
<Left side>
Panel FG harness
Screw bind M3x8
Screw bind
Screw bind M3x8
Screw bind M3x8
M3x8
CN39
CN41
ADF earth harness
Main PCB insulation sheet
Main PCB ASSY
<Back side>
Document scanner
FG harness
Main PCB plate
Screw bind M3x8
Screw bind M3x8