EasyManuals Logo

Brother MFC-L8850CDW Service Manual

Brother MFC-L8850CDW
515 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
2-57
Confidential
â–  Error code 6801
The internal temperature sensor or side thermistor of the fuser unit detected a temperature
higher than the specified value.
< User Check >
- Decrease the room temperature.
- Place the machine away from a heater.
â–  Error code 6901
Some fuser unit errors occurred at power-ON or upon recovery from sleep mode.
Error code 6902
After the errors was detected at the fuser unit, power was turned ON again and the error is
being checked. (If power is turned OFF and ON after error code 6901 occurred, this code is
displayed for about 15 minutes.)
Cooling Down
Wait for a while
Step Cause Remedy
1 Connection failure of the internal
temperature sensor harness
Reconnect the internal temperature
sensor harness.
2 Side thermistor of the fuser unit
failure
Replace the fuser unit.
3 Main PCB failure Replace the main PCB ASSY.
Self-Diagnostic
Turn the power off, then on again. Leave the machine for 15 min.
Self-Diagnostic
Will Automatically Restart within 15 minutes.
Step Cause Remedy
1 Connection failure of each
harness of the fuser unit
Reconnect each harness of the fuser unit.
2 Connection failure of the eject
sensor PCB harness
Reconnect the eject sensor PCB harness.
3 Fuser unit failure Replace the fuser unit.
4 Eject sensor PCB failure Replace the eject sensor PCB ASSY.
5 Low-voltage power supply PCB
failure
Replace the low-voltage power supply
PCB unit.
6 Main PCB failure Replace the main PCB ASSY.
Note:
- Turn OFF the power switch. After checking that the fuser unit has cooled sufficiently, turn
ON the power switch again and leave the machine for ten minutes. This problem may
then be cleared.
- To clear the fuser unit error after the remedy of the error is taken, enter the maintenance
mode and then exit from the maintenance mode using Function code 99.

Table of Contents

Other manuals for Brother MFC-L8850CDW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-L8850CDW and is the answer not in the manual?

Brother MFC-L8850CDW Specifications

General IconGeneral
Typeall in one
Colorwhite
Tray Capacity300
Automatic Document Feeder Capacity50 sheets
Paper Size8.5"x14"
Paper Handlingup to 300 sheets
Color Print Speed32 pages per minute
Mono Print Speed32 pages per minute
Print Resolution Colorup to 2400 x 600
Maximum Number of Pages Per Monthunknown
Scanner Typeflatbed
Scan Resolutionup to 2400 x 1200
Copier Resolution Monoup to 600 x 600
Copier Resolution Colorup to 600 x 600
Cartridgestn331bk, tn331c, tn331m, tn331y
Number Of Cartridges4
Internal Memoryyes
Memory Cardno
Networkwired, wireless
Connectivityusb, google cloud print
OS Compatibilitywindows, mac os, linux
Mobile Devices Connectionyes
Weight and Dimensions IconWeight and Dimensions
Height19.3 inches
Width20.7 inches
Net Weight67.4 pounds

Related product manuals