Brother MFC-L8850CDW - Page 98

2-68
Confidential
■ Error code 9301
When paper was fed from the MP tray, the MP paper empty sensor detected that no paper
was in the MP tray.
< User Check >
- Load paper to the MP tray.
■ Error code 9302
When paper was fed from the paper tray 1, the T1 paper feed sensor detected that no paper
was in the paper tray 1.
< User Check >
- Load paper to the paper tray.
No Paper
Reload paper in MP Tray.
Step Cause Remedy
1 MP paper empty actuator caught
on some position
Re-assemble the MP paper empty
actuator.
2 Connection failure of the MP
paper empty/registration front
sensor PCB harness
Reconnect the MP paper empty/
registration front sensor PCB harness.
3 MP paper empty sensor failure Replace the MP paper empty/registration
front sensor PCB ASSY.
4 Main PCB failure Replace the main PCB ASSY.
No Paper
Reload paper in Tray 1.
Step Cause Remedy
1 T1 paper feed actuator caught on
some position
Re-assemble the T1 paper feed actuator.
2 Connection failure of the T1
paper feed sensor PCB harness
Reconnect the T1 paper feed sensor PCB
harness.
3 T1 paper feed sensor failure Replace the T1 paper feed sensor PCB
ASSY.
4 Main PCB failure Replace the main PCB ASSY.