156
FUEL SYSTEM
FUEL COMPONENT SERVICING
Install oil filter and oil and fuel supply hoses.
Install crankshaft position sensor.
Install vapor separator vent hose and oil recircula-
tion hose. Secure with tie straps.
Connect throttle linkage and throttle position sen-
sor connector.
Secure connector to reed plate bracket with tie
strap.
IMPORTANT: DO NOT lubricate throttle link-
ages.
Refer to TPS Calibration on p. 116.
1. Tie strap 005343
1. Vapor separator vent hose
2. Throttle linkage
3. TPS electrical connector
4. Tie strap
005361
To Next Page
Loading...
