Safety
14 H148850_3_003
WARNING
Pinch Hazard
Keep fingers, hair, and loose clothing away from the moving parts of the device.
WARNING
Laceration/Pinch/Puncture Hazard
When the device power is left on, motors may move unexpectedly and cause injury.
u Ensure the device power is off before proceeding with installation.
3.1.6 Explanation of Caution and Warning Notices
Explanation of Caution and Warning Notices
Warning symbol marked on device.
• This symbol means “Attention! Refer to the manual.
Crush Hazard / Pinch Point.
• Keep hands clear of moving parts. X, Y, Z axis movement may crush hand.
Puncture Hazard – Moving parts can cause severe injury.
• Do not put hand under the gripper assembly!
Lifting Hazard – Single person lift could cause injury.
• Use assistance when moving or lifting.
3.2 Electromagnetic Interference
FEDERAL COMMUNICATIONS COMMISSION (FCC) NOTICE
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a commercial installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. Operation of this equipment in a residential environment is likely to cause
harmful interference, in which case the user will be required to correct the interference at his
expense.
To Next Page
Loading...
