Bruker minispec - About This Manual; Policy Statement; Symbols and Conventions

About This Manual
H148850_3_003 7
1 About This Manual
This manual enables safe and efficient handling of the device.
This manual is an integral part of the device, and must be kept in close proximity to the
device where it is permanently accessible to personnel. In addition, instructions concerning
labor protection laws, operator regulations tools and supplies must be available and adhered
to.
Before starting any work, personnel must read the manual thoroughly and understand
its contents. Compliance with all specified safety and operating instructions, as well as local
work safety regulations, are vital to ensure safe operation.
The figures shown in this manual are designed to be general and informative and may not
represent the specific Bruker model, component or software/firmware version you are
working with. Options and accessories may or may not be illustrated in each figure.
1.1 Policy Statement
It is Bruker’s policy to improve products as new techniques and components become
available. Bruker reserves the right to change specifications at any time.
Every effort has been made to avoid errors in text and Figure presentation in this publication.
In order to produce useful and appropriate documentation, we welcome your comments on
this publication. Field Service Engineers are advised to check regularly with Bruker for
updated information.
Bruker is committed to providing customers with inventive, high-quality, environmentally-
sound products and services.
1.2 Symbols and Conventions
Safety instructions in this manual and labels of devices are marked with symbols. .
The safety instructions are introduced using indicative words which express the extent of the
hazard.
In order to avoid accidents, personal injury or damage to property, always observe safety
instructions and proceed with care.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
This is the consequence of not following the warning.
1. This is the safety condition.
u This is the safety instruction.