Operation
44 H148850_3_003
8.1.1 Purchasing Supplies
Because the life-span of the sample vials varies, you should maintain an adequate supply of
spare vials. When you need to purchase additional supplies, it is extremely important that you
choose the appropriate sizes and materials.
When you purchase sample vials, make sure they meet the following requirements:
• The diameter of the vial matches the rack size you are using.
• The height provides sufficient clearance below the gripper.
• The material is compatible with the samples you are analyzing.
CAUTION
Hazard from Mismatched Sample Vials
Use of mismatched sample vials may result in malfunctions or sample spills. Be sure your
vials meet the given requirements.
8.2 Starting the Sample Changer
Once the samples are loaded, you can start the sample changer and let it run until the
sampling sequence is finished.
WARNING
Pinch Hazard
Keep fingers, hair, and loose clothing away from the moving parts of the device.
• Turn the sample changer power switch on.
The LED power indicator along the sample changer X-Axis lights up when the power is on.
• Access the host computer’s software and activate the sample changer program.
The sample changer runs until it reaches the end of the sampling sequence.
To Next Page
Loading...
Need help?
General
