Bruker minispec - Operating the Sample Stage

Sample Stage
H148850_3_003 53
WARNING
Fire and Shock Hazard
Incorrect installation or use of the power supply may result in a fire or shock hazard.
u Use only the provided power supply.
u The power supply must be plugged into an outlet which has a protective ground
connection.
u Ensure that the power cord is disconnected before removing any covers.
Figure9.9: Power Connections for the Sample Stage
9.2 Operating the Sample Stage
Power-On
To turn the sample stage on, plug in the cord from the provided power supply into the
connector on the back of the sample stage.
Power-Off
To turn the sample stage off, unplug the power cord from the back of the sample stage.