Bruker VANTEC-1 - Page 20

System Description VÅNTEC-1 Detector User Manual
3 - 6 M88-E01072
To determine which type of detector controller
you have, simply examine the rear panel of the
detector controller.
External FDC: The uppermost slot on the right-
hand side of the detector controller’s rear panel
contains both a DB9 male connector and a
DB25 male connector (Figure 3.2).
Figure 3.2 - External FDC identification
Integrated FDC: The uppermost slot on the
right-hand side of the detector controller’s rear
panel contains only a DB9 male connector. The
DB25 male connector is missing (Figure 3.3).
Figure 3.3 - Integrated FDC identification