Bruker VANTEC-1 User Manual

VÅNTEC-1 Detector User Manual Software Configuration
M88-E01072 6 - 3
4.4 Select the Internet Protocol (TCP/IP)
item and click the Properties button.
Another dialog box will appear (see Fig-
ure 6.2).
Figure 6.2 - Internet Protocol (TCP/IP) Properties
4.5 Select the “Use the following IP
address” radio button and enter
192.168.23.1 for the IP address and
255.255.255.0 for the Subnet mask.
Leave all other fields blank.
4.6 Confirm and close both dialog boxes by
clicking OK in each box.
The frame buffer computer’s network adapter is
now configured.

Bruker VANTEC-1 Specifications

General

Brand	Bruker
Model	VANTEC-1
Category	Security Sensors
Language	English