18 T419S Indicator Service Manual
4 User level menu
4 User level menu
The User level menu (password 111) consists of these three menus:
l User - Use to set Time, Date, Site ID, check Seal status and check Archive
information.
l About - Use to see information on the software, firmware, application, serial
number, options, ethernet and downloads
l Audit - Use to check and/or print the calibration and configuration counters.
Follow these steps to access and use these menus.
1. Press and hold the SETUP key until the password entry screen appears.
2. Key in 111 and press the ENTER key …
This screen is displayed:
3. Highlight the menu you want to enter and press the ENTER key. See Menu
Navigation on page 17. Below are the explanations for these menus.
4.1 User menu
Here is the menu map for the User menu:
User
Time Date Site ID Seal Archive
Key in
Site ID
number
Displays
Seal
status
• Set
• Style
• Set
• Style
• Print
• Port 1
• Port 2
• Port 3
• USB
Archive menu item appears
only if enabled in the
ADMIN>System menu.
To Next Page
Loading...
Need help?
General
