BTEK T419S Service Manual

T419S Indicator Service Manual 89
9.1 Configuration report
9 Printed reports
Below are examples of a Configuration report, a Calibration report and an Audit report.
9.1 Configuration report
Below is a partial sample printout of a configuration report.
Parameter Value Data Type
SCALE_1_STABILITY_DIV 3 DOUBLE
SCALE_1_STABILITY_TIME 1 DOUBLE
SCALE_1_AZT_DIV 3 DOUBLE
SCALE_1_AZT_TIME 1 DOUBLE
SCALE_1_ZERO_RANGE 100 DOUBLE
SCALE_1_OVER_CAP_BASIS 0 ENUM
SCALE_1_OVER_CAP_DIV 9 INTEGER
SCALE_1_OVER_CAP_PER 105 DOUBLE
SCALE_1_UNDER_CAP_DIV 250 INTEGER
SCALE_1_UNDER_CAP_PER 20 DOUBLE
SCALE_1_CZERO 0.25 DOUBLE
SCALE_1_GZERO_BAND 10 INTEGER
DISPLAY_SEPARATOR 0 ENUM
DISPLAY_UPDATE_RATE 10 INTEGER
SITE_ID SiteId STRING
CALIBRATION_PASSWORD 2580 INTEGER
COM1_BAUD_RATE 9600 INTEGER
COM1_DATA_BITS 8 INTEGER
COM1_PARITY 0 ENUM
COM1_STOP_BITS 0 ENUM
COM1_CONTROL 0 ENUM
etc.
9.2 Calibration report
CALIBRATION REPORT
Parameter Value
SCALE_1_ZERO_COUNTS Value = 255037
SCALE_1_LIN_FACTOR_1_WT Value = 0.00000000
SCALE_1_LIN_FACTOR_1_CNT Value = 0
SCALE_1_LIN_FACTOR_2_WT Value = 0.00000000
SCALE_1_LIN_FACTOR_2_CNT Value = 0
SCALE_1_LIN_FACTOR_3_WT Value = 0.00000000
SCALE_1_LIN_FACTOR_3_CNT Value = 0
SCALE_1_SPAN_FACTOR Value = 0.00000909
SCALE_1_GRAVITY Value = 9.8043
SCALE_1_ZERO_MV Value = 0.38003510
SCALE_1_SPAN_MV Value = 1.63769878
SCALE_1_ALTITUDE Value = 0.00000000
SCALE_1_LATITUDE Value = 0.00000000
SCALE_1_SPAN_COUNTS Value = 1099040
SCALE_1_CAL_WEIGHT Value = 10.0000000
UNIT SERIAL NUMBER Value = 20120111

BTEK T419S Specifications

General

Brand	BTEK
Model	T419S
Category	Measuring Instruments
Language	English