T419S Indicator Service Manual 79
8.7 Wireless communication cards
8.7 Wireless communication cards
Shown below is the RM300 radio module for wireless communications and its antenna.
See the user and/or installation instructions included with this unit for more information.
Following is the legacy card used for wireless communication. It is no longer available.
Figure 8.8 shows the Wireless Ethernet communication 802.11g card. This provides
wireless Ethernet connectivity via the 802.11g protocol.
Figure 8.8 802.11g wireless communication option card
See Switch S1 settings
on page 72
To Next Page
Loading...
Need help?
General
