BTEK T419S Service Manual

T419S Indicator Service Manual 19
4.2 About menu
Use the Left and Right keys to highlight the menu item you want to access and press
the ENTER key. Each of the items are explained below.
Time Set - Use the numeric keys to enter the correct time in the style chosen
below.
Style - Choose the style of time display from these choices:
l 12HR - Shows time in the 12 hour style
l 12HR-AP - Shows time in the 12 hour style with AM/PM
l 24HR - Shows time in the 24 hour style
Date Set - Use the numeric keys to enter the correct date in the style chosen
below.
Style - Choose the style of date display from these choices:
l MMDD2Y
l MMDD4Y
l DDMM2Y
l DDMM4Y
Site ID Use the alphanumeric keys to enter a Site ID, up to six characters.
Seal Shows the status of the physical seal jumper inside the indicator: SEAL or
NO SEAL. If the unit is sealed, no changes can be made to the
configuration of the indicator.
Archive Allows you to print the archived transaction information. This item appears
only if so configured in the ADMIN password protected menu.
4.2 About menu
If you access the About menu use this menu map:
App
• PartNo
• Version
Serial
View
indicator
SN
Boot
• PartNo
• Version
Firm
• PartNo
• Version
Option
• Bus 1
• Bus 2
• Card 1
• Type
• Version
Enet
• IP Addr
• Subnet
• Gateway
• MAC
DLoad
• sSerial
• dSerial
• Scale 1-8
• SW Part
• Version
• Cur.Ser
• Cal.Ser
BSQ
About

BTEK T419S Specifications

General

Brand	BTEK
Model	T419S
Category	Measuring Instruments
Language	English