T419S Indicator Service Manual 43
6.3 System menu
Invert Inverts the color values of the display. Choose Off for green graphics over
a black background. Choose On for black graphics over a green
background.
6.3.3 Buttons
Use this item to configure each button (key) On or Off. This allows you to limit the front
panel function to suit your situation. Follow the same procedure for each key to turn it
on or off. On is the default value for all the buttons. These are the keys listed under
Buttons: Print, Units, Select, Tare, Zero, F1-F5, Start, Stop, Setup, Scale, Numpad
and Qwerty.
6.3.4 D-Vals
This stands for the displayable active values. In normal weighing mode, press SELECT
to scroll through all enabled values. Activate the ones in the following list that you want
the ability to view during normal weighing mode.
Gross Activate this to see the gross weight value.
Tare Activate this to see the tare weight value.
Net Activate this to see the net weight value.
Min Activate this to see the minimum weight value.
Max Activate this to see the maximum weight value.
G Total Activate this to see the gross total weight value.
N Total Activate this to see the net total weight value.
T Total Activate this to see the tare total weight value.
C Total Activate this to see the count total value.
TranCnt Activate this to see the transaction count value.
Count Activate this to see the count value.
Pc Wt Activate this to see the piece weight value.
A2D Cnt Activate this to see the A to D count value.
Percent Activate this to see the percent value.
InMo Activate this to see the averaged weight value when an inmotion
application is operating.
Target Activate this to see the target weight value.
GTotPls Activate this to see the gross total + current gross value. This parameter is
commonly used in conjunction with the accumulation procedure for
multiple-dump batching applications.
GTotMin Activate this to see the gross total - current gross value.
NTotPls Activate this to see the net total + current net value.
NTotMin Activate this to see the net total - current net value.
To Next Page
Loading...
Need help?
General
