Burkert 8175 - Reseting of the Distance Reference Point

36
8175
ENGLISH
CALIBRATION MENU
ENTER
ENTER
0......9
ENTER
0......9
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
0......9
ENTER
0......9
TEACH Y
VALID Y
VALID N
END YES
END NO
CURRENT
CURRENT
VALID Y
VALID N
CURRENT
CURRENT
Enter the first reference distance or level (1st Point).
Enter the second reference distance or level (2nd Point).
 - RESETTING OF THE DISTANCE REFERENCE POINT
This function is only available if the transmitter has been configured for distance
measurement. Within this option it is possible to erase any user defined reference
point and return to the ‘default‘ reference point - the base of the sensor.
On recieving the transmitter the reference point will be configured as the base
of the sensor.
RESET VALID Y
VALID N
CURRENT

4.4.6
1=0.000
1=0.065
PROCESS
2=0.000
2=0.130
PROCESS
