BW Technologies GasAlertMicroClip XT - Getting Started

GasAlertMicroClip
User Manual
6
Silicones
• Silicone cleaners and protectants
• Silicone based adhesives, sealants, and gels
• Hand/body and medicinal creams containing silicone
• Tissues containing silicone
• Mold releasing agents
• Polishes
Aerosols
• Bug repellents and sprays
• Lubricants
• Rust inhibitors
• Window cleaners
Getting Started
The list below provides the standard items included with the detector. If
the detector is damaged or parts are missing, contact the place of
purchase immediately.
• Sensors: H
2
S, CO, O
2
, and combustible (LEL)
• Calibration cap and hose
• Charging adapter
• Printed Operator‘s Manual
• Supplementary Booklet, including a Quick Reference Card
• CD-ROM, including translated operator‘s manuals
Configuration Software: The detector is configured with Fleet Manager
II software. It can be downloaded for free from BW Technologies by
Honeywell website: www.gasmonitors.com
.
Fleet Manager II CD-ROM is shipped with the MicroDock II base station
and IR Link kit.
The detector is shipped with the sensors and rechargeable battery
installed.
Battery Replacement: To replace the battery, contact BW Technologies
by Honeywell. The battery can only be replaced by the manufacturer.
Charge Battery and Replace Sensors: To charge the battery and
replace the sensors and/or sensor filter, refer to the following:
•
Battery Cautions
• Replacing a Sensor or Sensor Filter
To order replacement parts, refer to Replacement Parts and
Accessories.
To become oriented with the features and functions of the detector, refer
to the following figures and tables:
• Figure 1.
and Table 3. describes the detector’s components.
• Figure 2.
and Table 4. describes the detector’s display elements.
•Table 5.
describes the detector’s pushbutton.