63
GasAlertMicroClip
Specifications
ICES-003 Canadian EMI requirements. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one of more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
General Datalogger Specifications
Storage: 16 hours at 15-second intervals
Memory type: Wraparound memory ensures most recent data is always
saved
Datalog Interval: The default interval is one reading every 15 seconds.
The user has the option to change the intervals to rates from 1 to
120 seconds.
Data recorded: All sensor readings, all alarm conditions, calibrations,
event flags, battery status, sensor status, confidence beep activation,
and detector status with the time and date for each reading and unit
serial number
Operation: Requires no user intervention (automatic)
Compatible with: Desktop PC computer or laptop
Operating system: Windows 2000 or higher
Download via: IR device (IR Link adapter or MicroDock II base station)
Software required:
• Fleet Manager II application,
• Microsoft Excel (optional) to create custom reports.
To Next Page
Loading...
