EasyManua.ls Logo

BW Technologies GasAlertMicroClip XT - Introduction; Zeroing the Sensors

BW Technologies GasAlertMicroClip XT
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
GasAlertMicroClip
Introduction
a Warning
To ensure personal safety, read Safety Information - Read
First and the Cautions before using the detector.
The GasAlertMicroClip XT, XL and X3 (“the detector”) warns of
hazardous gas at levels above user-defined alarm setpoints.
The detector is a personal safety device. It is your responsibility to
respond properly to the alarm.
Table 1.
lists the gases monitored.
Zeroing the Sensors
To zero the sensors, refer to steps #1-3 in Connecting to the IR Link.
Table 1. Gases Monitored
Gas Detected Unit of Measure
Hydrogen sulfide (H
2
S) parts per million (ppm)
Carbon monoxide (CO) parts per million (ppm)
Oxygen (O
2
) percent by volume (%)
Combustible gases (LEL)
Field selectable for:
1. percent of lower explosive
limit (% LEL)
2. percent by volume met
hane
0-
5.0% v/v

Table of Contents

Other manuals for BW Technologies GasAlertMicroClip XT

Related product manuals